12
9.
Unscrew the upper hinge axis, turn
the upper hinge over and fix axis on it.
Then place it at side for use.
10.
Exchange wires both in the left and
right slots of refrigerator body.
11.
Move the door to appropriate
position, adjust part
①
and the door,
Move the connecting wire
②
in the slot of
the door from right to left, and then fix
part
①
and wire
②
with screws
③
. (Please
hold the door by hand when installing)
12.
Connect electrical connector
①
in
accordance with step 3 and then install
part
②
(which is in the plastic bag).
13.
Reverse part
①
by 180°and install it
onto the right corner of the door
，
then
mount part
②
. (both of which are taken
down in step 2)
14.
Take the reed switch out of the
coping block (part
③
in step 3) and
mount it on another block for use
(marked “R” in the plastic bag). Place
the removed coping block back into the
plastic bag.
Note
：
Be sure character side of reed
switch fits well with coping block.
15.
Install part
①
, connect the wire
connector
②
, and then install part
③
16.
Open the door, mount door racks
and then close it.
1
3
2
2
1
①
②
upper hinge cover(left)
③
①
②
Summary of Contents for BFL584YNW
Page 144: ......
