Brandt BFC8027SW, Instruction Manual, Page: 35 / 92

Reversing the doors
•
Make sure that the appliance is empty and unplugged from the mains.
•
To remove the door you will need to tilt the appliance back. Rest the appliance against a hard
surface so that it does not slip during the operation.
•
Retain all of the parts removed to reinstall the door.
•
Do not lay the appliance down on the floor as this could damage the refrigeration system.
•
Two people are better able to handle the appliance during the operation.
Before reversing the doors so that they open the other way, first prepare the following tools and
parts: a flat screwdriver, a cross (Phillips) screwdriver, spanner and the components included in
the bag:
Required tools: Flat screwdriver, cross (Phillips) screwdriver, spanner.
1. Carefully remove the hinge cover using a flat screwdriver.
2. Unscrew the upper hinge.
3. Remove the hole cover and transfer it from left to right, then remove the upper door and place
it on a flat padded surface to prevent it from being scratched.