EN
4
POWER ON / RADIO MODE
Press
POWER
to switch the unit on and enter the radio mode.
The radio frequency will briefly appear on the display and then return to
clock time.
RADIO OPERATION
1. Press
POWER
to turn on the radio.
The default FM radio frequency is 87.5 MHz.
2. Press
BAND
once to enter the AM radio mode.
The default AM radio frequency is 522 KHz.
3. Repeatedly
press
BAND
to select the desired radio band.
4.
Adjust the volume by repeatedly pressing
VOL+
/
VOL-
.
5. Repeatedly
press
TU+
/
TU-
to tune into the desired station.
Press and hold
TU+
/
TU-
for auto forward or backward radio station
searching.
NOTE:
For the best FM reception, extend the FM aerial to its full length.
For the best AM reception, rotate the unit slowly and horizontally.
PRESETTING YOUR FAVOURITE RADIO STATION
Up to 10 FM and 10 AM radio stations can be preset.
1.
Follow steps in "RADIO OPERATION" and tune into the station that you
wish to preset.
2.
Press and hold
SET
for about 2 seconds, “P01” will
flash on the display.
3. Press
SET
again to store the station.
4.
Repeat steps 1 to 3 to store desired stations.
To listen to preset radio stations, repeatedly press
MEM
to select the desired
radio station.
DUAL ALARMS OPERATION
Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
1. In standby mode, press and hold
AL1 / AL2
until “0:00” flashes on the
display.
Downloaded from www.vandenborre.be
