EN
EN-3
DISPLAY
14. Alarm 1 buzzer indicator
15. Alarm 1 radio indicator
16. Alarm 2 buzzer indicator
17. Alarm 2 radio indicator
BATTERY BACKUP
The clock, alarm and preset stations settings can be protected against AC power
failure with the batteries for a short period of time. If no backup batteries are
installed or the power failure is prolonged, you will need to set the clock again.
STANDBY MODE
Place the unit on a flat stable surface and plug the power cord into the mains
socket.
The unit is in standby mode and “0:00” will flash on the display.
SETTING THE CLOCK
1. In standby mode, press and hold
SET
until the display flashes.
2. Repeatedly press
HR
to set the hours.
3. Repeatedly press
MIN
to set the minutes.
4. Press
SET
to confirm.
The hour and minute digits will stop flashing.
POWER ON/RADIO MODE
Press
POWER
to switch the unit on and enters the radio mode.
The radio frequency will briefly appear on the display and then return to
clock time.
