Brandt 3660767985711, Instruction Manual

Page: 39 / 58

Troubleshooting
Warning! If there is any anomaly, unplug your appliance. Only a qualified electrician
or competent person may carry out troubleshooting.
If there is any anomaly during operation, check the following points before calling our approved
after sales service or a qualified professional.
Problem Possible cause Solution
Appliance
does not
work. The power cord is not plugged in
or is loose. Connect the power cord.
Fuse has blown or is defective. Check fuse, replace if necessary.
Outlet is defective. Electrical malfunctions need to be repaired
by an electrician.
Appliance
freezes or
cools too
much. Temperature is set too cold Turn the thermostat to a warmer setting
temporarily.
Food is not
frozen
enough. Temperature is not properly set. Please refer to the section on
setting the temperature.
Door was open for an extended
period. Only open the door when necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours. Turn the thermostat to a colder setting
temporarily.
The appliance is near a heat
source. Please refer to the installation location
section
Heavy build-
up of frost on
the door seal. The door seal is not sealing. Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool
setting). At the same time, handle the
heated door seal with your hands to ensure
that the appliance seals.
Unusual
noises The appliance is not level. Readjust the feet.
The appliance is touching the
wall or other objects. Move the appliance slightly.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall. If necessary, carefully bend the component
out of the way.

Some noises may be heard during normal appliance operation (compressor operating
cycle, automatic defrosting, circulation of the refrigerating gas through the appliance,
etc.).

If you cannot find the cause of the anomaly, only call our approved after sales service
or a qualified professional.