17
English
5 Installation
Take the appliance out of the package and remove all packaging material. The fan
heater has to be placed on a flat surface.
Caution!
Ensure that the device is not placed near any flammable materials or flu
-
ids, or with the air discharge pointing in these directions.
6 Initial use
Connect the device to a 230 V AC socket. To start the device, turn the "On/Off/
Speed settings" switch, located on the top of the device, to the desired speed and
select the desired temperature using the Temperature regulator.
7 Overheating
Overheating generally occurs only if one of the openings of the fan heater is
blocked. This device comes with a non self-resetting thermal fuse. The heater
switches off automatically once the overheating temperature is reached. The fan
heater can be operated again only after the fuse is replaced by the manufacturer
or an equally qualified person.
8 Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact with
mains voltages. Do not short-circuit the product. The device is not certified for use
in the open air; only use it in dry conditions. Protect it from high humidity, water
and snow. Keep it away from high temperatures. Do not subject the device to sud
-
den changes in temperature or heavy vibration as this might damage electronic
components. Examine the device for damage before using it. The unit should not
be used if it has received an impact or has been damaged in any other way. Please
observe national regulations and restrictions.
Do not use the device for purposes other than those described in the instructions.
This product is not a toy. Keep it out of the reach of children or mentally impaired
persons. Any repair or alteration to the device not carried out by the original sup
-
plier, will invalidate the warranty or guarantee.