INSTALLATION INSTRUCTIONS
Step 23: Remove driver knee bolster cover.
Step 24: Remove (2x) 7mm bolts on both sides of
the steering column.
Step 25: Remove center stack/cluster surround.
Step 26: Remove glove box for access and run
Mirror Harness toward center of dash.
Step 27: Using a plastic trim removal tool, remove
HVAC panel.
Step 28: Connecting Power
Splice Red power wire to White/Grey reverse wire in
passenger kick panel (Engage parking brake and
verify reverse wire has 12v only when vehicle is in
reverse). Splice Black Ground to chassis ground.
RECOMMENDED: Use solder and cover with heat
shrink tubing or use T-taps as an alternate
connection method.
9002-8858 Instructions 6-10-19.docx
Page 6 of
7
KB
