INSTALLATION INSTRUCTIONS
Jeep Wrangler Adjustable Rear Vision
System for Factory Display Radios
,
2007 – 2018 JK (Kit # 9002-8847)
Items Included in the Kit
Camera
Chassis Harness
Power Harness
22--pin white connector w/ video RCA (for factory
display radio)
Program Module
Zip lock bag with 15 Wire Ties & 3 Push Nuts
Camera Extension Bracket
These Instructions
Required Tools & Supplies
T15 & T20 Torx Bits
7mm & 10mm Sockets
Phillips Screwdriver
3/8” Wrench or Socket Drive
Plastic Trim Removal Tool
Soldering Iron, Solder, & Heat Shrink Tubing
(RECOMMENDED) or T-taps as an alternate
splicing method
Electrical Tape
Please read so you do not VOID the
warranty:
If the camera harness is run through the center on the camera bracket, it
will cut the camera harness. This will void the warranty on the camera.
9002-8847 Instructions 6-10-19.docx
Page 1 of
7
KB
