7
OPERATION
BLEND
1.
Place the appliance on a flat surface. Make sure it is unplugged.
2.
Prepare fruits, vegetables, and other foods by cutting them into
cubes about 1-inch square. Remove the measuring cup and carafe
lid, then put the cubed foods into the carafe. Add purified water to
facilitate the smooth running of the appliance; the recommended
ratio of food to water is
2:3
. The amount of mixture should not
exceed the max level as indicated on the carafe. Place carafe lid
and place measuring cup well in position.
3.
Connect the appliance with power source, and then push the power
switch to “
ON
” position.
4.
Turn the speed dial to the “
HI
” speed setting to blend food items.
5.
After blending for about 30 seconds, turn the speed dial to “
OFF
”
position.
6
. You may add more ingredients into the carafe after initial blending.
First, turn off the appliance, and then remove the measuring cup and
add the ingredients into the carafe through the center opening of
carafe. Next, replace the measuring cup in position. Finally, turn on
the appliance again.
NOTE:
a.
During operation, if the mixture is too thick to be blended,
operate by referring to the description of “Tamper” mentioned
previously.
b.
Do not remove the carafe from the motor unit during working
process. If it is necessary to remove the carafe, first turn off the
appliance.
c.
The maximum operation time per use should not exceed 3
minutes, and a minimum of 20 minutes rest-time must be
maintained between two consecutive cycles. The appliance
must rest for at least 30 minutes every 10 cycles.