Eng
lish
instruction manual
17
a 3 volt Lithium CR2025 button cell. Ensure that the + side of the battery is on the underside of
the cover as you slide it back in.
SETTING UP YOUR SPEAKER
Attaching the base
1. Carefully take the tower speaker and base out of the packaging.
2. Take the screws out.
3. Attach the base to the body aligning the four holes in the base with the four holes in the tower
speaker.
4. Screw the base into the body.
5. Stand the tower upright on the floor. The unit is now ready for use.
INSTRUCTIONS FOR USE
Turning the Digitower On
Position the unit where it is going to be used. Connect the AC-DC adaptor to the speaker and
plug the adaptor to the power supply. Switch the power on/off button at the back the speaker to
on position. Press the standby/on button on the top panel to turn the speaker on.
Listening to the Radio
After the speaker is turned on, press the mode button to select the FM radio mode. The LED indi-
cator of FM will light up. Press the skip+ / skip- button to select the desire radio station.
