8. If you want to connect the TT-182NPC BT to another Bluetooth enabled device after you’ve already
successfully paired to another device, turn off the Bluetooth on the device that was previously paired
with the JTA-230BT. The JTA-230BT Bluetooth indicator will begin flashing, repeat step 1-6 above.
Note: The JTA-230BT may automatically reconnect to a previously linked device that is in range, so you
may need to turn off the Bluetooth on any paired device first before going through the above steps.
PLAY MUSIC FROM YOUR BLUETOOTH DEVICE WIRELESSLY TO THE TT-182NPC.
1. Select your favorite song, press the Play/Pause on your Bluetooth device to play or pause the song from
your Bluetooth device.
2. Press the skip forward/skip backward on your Bluetooth device to select the Next or Previous track.
3. Slowly adjust both the volume controls of your JTA-230BT and your Bluetooth device until you reach a
comfortable listening level.
CONNECTING TO A COMPUTER FOR RECORDING
Before getting start, please install the “ AUDACITY ” recording software to your computer. Below is an
example using a computer with Microsoft XP and the Audacity software installed. For more options, please
refer to Audacity software guide separately.
1) Turn on your computer and allow it to boot fully. Turn the unit power ON, connect the USB port (16)
from the unit to your computer via the USB cable provided. The unit connected to your PC will be
recognised as a USB device.
2) Open the “ AUDACITY ” program. Under the “ EDIT ” tab, select “ PREFERENCES ”.
3) Click the “DEVICE” tab and then choose the “USB Audio Controller” at Recording and Playback device
section
4) Select Channels “2 (STEREO)” and then click “OK” to close preference setting window.
5) Play the music such as Aux in/Phono to be recorded into the computer.
6) Click the red Record button on the software control panel. You will see a waveform moving and can
listen to the record playing through computer speakers.
7) When you have finished the recording, click the yellow Stop button on the software control panel.
8) Now click “FILE ” and choose to save your recording file.
9) Click the green Play button to playback your finished recording.
NOTE:
Free software (AUDACITY) licensed under the GNU general public license (GPL).
More information as well as open source code can be found on the provided CD or on
the website at:
http://audacity.sourceforge.net/
IMPORTANT NOTES
LISTENING AND EXPORTING TO MP3
To listen to your digitized audio, you will need a third party application that can play wave files. You can
also use any standard audio CD burning software to burn your wave files to an audio CD.
If you would like to save your vinyl recordings as MP3 files after recording them using AUDACITY, you will
need to install the optional "LAME MP3 ENCODER" plug-in to the software provided on the CD. Once a
file is in MP3 format it can be played on any MP3 compatible mobile digital device.
The provided CD also included the LAME MP3 Encoder plug-in.
In AUDACITY, when you attempt to EXPORT AS MP3… for the first time after installing the lame
MP3 encoder plug-in, you will be asked for the location of the plug-in file. Browse to the LAME MP3
PLUGIN FOLDER you copied the plug-in file to and select the file. Subsequently, audacity will
remember the location of this file.
E-3
