Bronco Electric Start Charcoal
BMBROCH
HARDWARE LIST
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1-855-200-8445 toll-free. Please have your owner’s manual and
model number available for reference.
Note: The model number is printed on a label which can be found on the side of the
fi ebox
For Easiest Assembly:
1. Select an area where you will assemble this product.
To protect components, choose a smooth surface that’s
free of cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then,
before completing each step, go back and fully tighten
all hardware.
Be careful not to overtighten. That could damage surfaces
or strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• One bag of charcoal (not included)
Typical assembly is approximately 30 minutes.
A:M6*75 Q235
Nickel Plated Philiips Truss Head............4Pcs
B:M6*75 Q235
Nickel Plated Philiips Truss Head...........36Pcs
C:M6*40 Q235
Nickel Plated Philiips Truss Head............8Pcs
D: 6.2
Q235
Heat Resistance Washer.......................2Pcs
E: 6.2
65Mn
Large Lock Washer............................2Pcs
F:M6*15
Q235
............................4Pcs
G:M8 Q235
Hex Nuts...................................4Pcs
I:M8 Q235
Wrench.......................2Pcs
J:Screwdriver..................2Pcs
K:Hinge Axis........................2Pcs
L:Wave Pin..........................2Pcs
M:M4*10 Q235
Nickel Plated Philiips Truss Head.....2Pcs
N:M5*12 Q235
Nickel Plated Philiips Truss Head.....2Pcs
P:M5 Q235
Hex Nuts........................4Pcs
H:ST4.2*10 Q235
Tapping Screw.............................4Pcs
ASSEMBLY INSTRUCTIONS