manualshive.com logo in svg

Brand Innovations BI-0316, Technical Manual

Share
Download
Brand Innovations BI-0316 Technical Manual Download Page 16

BI-0316

Functional Description

Technical Manual

Page 2-5

Brand Innovators

This setup connects the BI-0316 to a 16-bit (WIDE) bus at the front and a 8-bit bus at the rear of the
module. Note that the upper byte signals must be terminated on the 16-bit to 8-bit adapter. This is
achieved by the on-board terminators of the BI-0318 module. These terminators are capable of termi-
nating Single-Ended as well as Differential SCSI buses.

See also “Mixing Buses Having Different Widths” on page 3-3.

2.6

SCSI Bus Backplane Connection Options

At the backplane different connection options are available:

•

Option I:

using a transition module on the VMEbus P2 connector

•

Option II:

using a flat cable connection on the VMEbus P2 connector

•

Option III:

using a special backplane layout to the VMEbus P2 connector

All three options can be used for 8-bit and 16-bit solutions in Single-Ended and Differential configura-
tions.

2.6.1

Option I. Transition Module

This is the most common and versatile option. It gives the capability to connect 8-bit and 16-bit cables
to the BI-0316. It gives also the capability to connect external terminators.

Table 2-2 

Termination Products for 50-pin Low Density Connector

Product

Description

Manufacturer

0-0869576-1

Ampmodu Unshielded Receptacle SCSI-2 Terminator, Low Density, 
Single-Ended, 50 positions

AMP

0-0869041-1

Ampmodu Unshielded Receptacle SCSI-2 Terminator, Low Density, 
Differential, 50 positions

AMP

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for BI-0316

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands