Brammo 2006 Ariel Atom 2, Owner'S Manual, Page: 64 / 79

58
MAINTENANCE SCHEDULE FOR THE ARIEL ATOM 2
SCHEDULE V: EVERY 1000 MILES (1600 KM)
Component Service/Operation
Engine Oil
Check before every track event or every 1,000 miles (1,600 km). Change as necessary.
Engine Oil Filter
Replace during every oil change.
Engine Coolant Check before every event. Replace every 30,000 miles (48,000 km).
Supercharger
Aftercooler Coolant
Check before every event. Replace every 30,000 miles (48,000 km).
Air Filter Clean and oil every 5,000 miles (8,000 km)
Spark Plugs Inspect before every track event and change if necessary.
Transmission Fluid
Change every 10,000 miles (16,000 km).
Brake Fluid Check level. Fill as needed.
Brake Rotors
Inspect and replace when thickness decreases to 19mm, when pulsation is noted, or if cracking or
other physical damage is found during inspection.
Brake Pads
Inspect for pad damage, thickness issues or deterioration. Replace brake pads when brake rotors
are replaced.
Brake Hoses &
Lines
Inspect brake lines for rubbing, scraping, or any damage.
Fuel Lines &
Connections
Inspect for damage.
Exhaust System
Visually inspect exhaust flange bolts for tightness and/or damage. Use a wrench to inspect flange
bolts for tightness every 5,000 miles (8,000 km), check gaskets visually to ensure they have not
developed a leak.
Tires
Inspect for any unusual tread wear.
Wheels Ensure lug nut torque is 80 ft-lbs.
Drive Belt Check for abnormal wear.
Rod Ends
Inspect rods ends on Push Rods, Steering Rods, and A-Arms for any signs of fatiguing or wear,
replace if parts appear worn. Verify that all check nuts are tight on all rod ends. We recommend
replacement of all suspension rod ends at 3000mi or sooner based upon driving habits.