6
bx_digital V2 mono manual
AUTO LISTEN MODE “G”
This AUTO LISTEN MODE finally is pretty easy to explain… as long as you click a
Gain knob (or grab a touch sensitive controller pot or fader) all other bands of
that EQ will be bypassed. This way all you hear is the touched EQ band solo-ed,
without other EQ bands eventually effecting / overlaying your EQ setting.
This may or may not be wanted, so remember: you have the choice to activate
or deactivate each and every AUTO feature (Q, f or G) or any combination of
these 3 features using the Auto Listen pop up menu. (see -12- above)
The Auto Listen Mode can be switched off using the blue LED.
3.5. Window switch
You may hide the graphic EQ curves if you want to save some screen
space (we know bx_digital is not a small plug-in…), or if you simply prefer
EQ-ing without seeing the EQ curves. Just click the “arrow” symbol.
3.6. Level LEDs
We have included a digital level control in bx_digital V2 mono that the
hardware does not have. Red LEDs indicate potentially distorted signals in
the respective signal-path and should be avoided…
3.7. Bass Shift
The Bass Shift is an „intelligent“ EQ band for the bass
frequencies of your mix. We call it Bass Shift because 2
different frequencies will be „shifted“ against each other with
the turn of just one knob. The frequencies have been pre-set
and cannot be changed. If you are looking for a sweepable
Bass- (and Presence-) Shifter please check out bx_hybrid
(available individually).
The Bass Shift EQ can be used to easily adjust the overall bass sound of your
recordings in a professional yet easy & fast way… turning the Bass Shift to the
right will „push“ your bass down one octave by boosting one part of your bass
frequencies while at the same time cutting other (higher) bass frequencies.
Turning the BASS SHIFT to the left will cause the opposite…
t
Please check the EQ panels to actually see what you are doing when
working with the Bass Shift!
Turning your BASS SHIFT to the right will result in a more „indirect“ and „deep
soft“ bass sound, while turning to the left will result in a „dryer“ bass sound.
t
A lot of contemporary pop & rock productions can be enhanced with
„phatter“ guitar / keys sounds by turning the Bass Shift to the right up to
2 or 3, and the same setting will make your bass drums sound huge!
3.8. Presence Shift
A similar function to what the Bass Shift EQ does to your
bass signals for the high end of your recordings.
Turning the Presence Shift EQ to the right will put more „air“
into your signals without making them harsh!
Summary of Contents for bx_digital V2 mono
Page 1: ...bx_digital V2 mono manual...
