Setup Instructions
Setup Instructions
Step 5
Subsequently, screw the side panels to the left and right
side of the chair frame. The 6 screws required for this are
packed separately (3 screws for each side panel). Please
make sure that the screws are sufficiently tightened.
Step 6
Pull out the air hoses in the shoulder area on the backrest
about 8 cm on both sides.
Step 7
Connect each of these air hoses with the L-shaped con-
necting pieces of the shoulder massage units and push the
air hoses around 5 cm back into the backrest.
Step 8
Affix the shoulder massage units at the top and the bot-
tom with the screws that are already attached to the back
frame. Fasten the two zips on the left and right side of the
back frame cover.
Step 5
Affix the armrests with 3 screws on each
side.
Affix the shoulder massage units with the
pre-attached screws – 2 on each side.
Step 8
9
