BrainCube Aeromodels - Fugly Construction Manual 23
Elevator Hinges - 1
Hinges x4
Elevator Hinges - 2
Insert pins into the centre of each hinge
to ensure they are inserted evenly into
the structure. Assemble the elevators
on to the tailplane with even pressure
until the gap is closed.
Do NOT apply glue yet!
The hinges need to be inserted into the
structure DRY.
Once in place, remove the pins. Holding the elevators against
the tailplane, angle them downwards so you can get the
nozzle of the thin CA bottle to the hinges. Apply drops of glue
to each hinge until they are saturated.
Wait 30 seconds for the CA to dry, then flex the elevators up
and down a few times to free the up.
Mind your fingers! It is easy for excess CA to go astray and
stick the model to your skin.
