Brain Bee B-TP 1000, Quick Manual

Page: 5 / 18

B-TP 1000
ENGLISH 4
Battery use and safety
Warning: The equipment includes two Li-ion batteries. These batteries can only be replaced by
Brain Bee authorized technical service centre.

Recharge the batteries using the battery charger or the battery power cable supplied with
the equipment.
 The user must not remove or replace the battery. The attempt to remove or replace the
battery may damage the battery and cause burns and injuries.

Do not try to disassemble or repair the equipment. The attempt to disassemble or repair the
battery may damage the battery and cause burns and injuries.
 Batteries performance is significantly reduced if the equipment is used outside the required
temperature range.

If the equipment is not used for a long period of time, batteries need to be periodically
recharged. If the battery runs completely flat, this will jeopardize its duration.

Do not use damaged cables for connection to the vehicle and comply with the connection-
related instructions.

Improper use of the batteries and failure to comply with the conditions of use indicated
herein might cause risk of fire, deflagration or fluid outflow.
Battery recharge
Notes for the recharge of the product’s internal battery
 For an efficient recharge of the battery, the equipment and the battery charger must be kept
at ambient temperature during recharge.

The new batteries are not supplied fully charged.

A new battery or a battery that has not been used in a long time may require a longer
recharge time.

The equipment, the internal batteries and the recharge system are provided with safety
circuits against possible overcharges.

The internal battery is recharged using the battery recharger supplied with the equipment.
 During the whole recharge phase, the “IN CHARGE” warning light is ON. Once the recharge
has been completed, the warning light turns off.
When operating on the engine

protect face, hands and feet, with suitable clothes, avoid contact with hot surfaces, such as
sparking plugs, radiators, pipings of the cooling system, exhaust pipes. Catalytic mufflers
reach extremely high temperatures and can cause burns or fires.
 Do not smoke and do not use open flames when operating on the engine.
 In the vehicles, the cooling fan starts automatically by means of a temperature sensor even
when the engine is off; always pay attention when operating close to it and disconnect it if
needed.
Precautions for equipment use

We recommend a first charging cycle of the battery for at least 8 consecutive hours.
 Do not pour water or other fluids onto the system
 Protect the equipment from rain or excessive humidity to avoid damaging it irremediably.

The equipment shall never be directly exposed to excessive dust.

Use exclusively original connection cables.
 Do not place the equipment on live electrical terminals.
 Shall the following technical problems occur, do not use the equipment and contact the
authorized technical service centre or your reseller:
o
A fluid has been spilled on the equipment.
o
The equipment is not working properly