DIGI
MIC
CMic ONE
Quick Guide
4
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
T +49 (0)2244 930-0
F +49 (0)2244 930-450
www.braehler-systems.com
05.0153 190522 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
The CMic ONE units operate in different mode settings. These are determined by the operator of the
conference. After pressing the microphone key, you have the following options.
The key and ring light up red: The microphone is open. You can speak to the remaining delegates.
The button and ring are off: The maximum number of speakers has been reached - you must try to switch on
your microphone again at a later time.
Button flashes red: The maximum number of speakers has been reached. You must wait (word request). Your
microphone is automatically activated as soon as it is your turn to speak.
Chairman version (CChair ONE)
The DIGIMIC CMic ONE is also available in a Chairman version. It gives special priority to the chairman of a
conference. Press the override button to mute all delegate units. There are two override variants:
Permanent: Press the override button to mute all delegate units. The delegates have to turn on their
microphones again to speak.
Temporary: By pressing and holding the override button, the delegate units are muted. As soon as you release
the override button, the delegate units are unlocked again.
Warnings
Set the CMic ONE to an appropriate volume. Do not listen too loudly through the headphones.
The connectors of the CMic ONE are only suitable for further CMic ONE, CChair ONE or DExt. Do not
connect any other devices!
In case of faults contact a technician, do not try to repair, unscrew or similar the CMic ONE by
yourself.
Override button
