To record symptoms on SEER Event Recorder
:
* Plug in and wait for “MONITORING” to flash on top of screen
* Press the blue and white button either on the front or side of recorder until you hear a tone
start then release
* Only one of the Recorder/Send buttons needs to be pressed at one time
* “RECORDING” will flash on the top of the screen when recording data to device
* SEER Recorder will save recordings 30 seconds before pressing and 30 seconds after for a
total of 1 minute of recorded data
When SEER Recorder is full and ready to download
:
* The canister on the right of the screen will be all black and the there will be a six at the top
and bottom
* Remove the lead set on the side of the recorder
* Call Home Cardiographics at 613-546-1451 or 613-544-3400 ext. 2249
* After speaking directly to a staff member place monitor on a flat surface
* Hold the send button on the side or top of recorder until a tone comes from the recorder and
hold for two seconds and then release
* Place the part you are speaking directly into the phone on top of the record button on the
front of the SEER Recorder
* You will hear a sound come from the recorder for 3-5 minutes
* Once the sound stops, pick up the phone and speak to staff member
The SEER Event Recorder should be unplugged when
:
* Sending downloads
* Changing batteries
* Before bathing/showering or swimming
How to change the batteries on SEER Recorder:
* Unplug lead set on side of recorder and remove from carrying case
* Slide the battery compartment door off, which is located on the front side at the bottom
* Remove the old batteries and replace with new ones provided to you at time of your
appointment (these are AAA batteries)
* Slide the battery door back on – screen should indicate the left canister is now showing black
6
6
6
6