Braeburn 7500 User Manual Download Page 3

Page: 3 / 40

Congratulations! You are in control of one of the easiest-to-use wireless thermostats on the market today.
This thermostat has been designed to provide you with years of reliable performance and comfort control.

Features

• Reliable BlueLink Smart Connect

wireless technology

• SpeedBar

multi-function button simplifies programming and setting changes.

• SpeedSet

programming gives you the option of programming all 7 days at once.

•

Convenient HOLD feature lets you override the program schedule.

•

Large 5 sq. in. bright blue backlit display is easy to read.

•

Extra large display characters make viewing settings even easier.

•

User selectable service monitors remind you of required system maintenance.

•

Precise temperature accuracy keeps you in control of your comfort.

•

Convenient programmable fan mode.

•

Optional indoor or outdoor remote sensing (wired or wireless).

3 User Manual

Summary of Contents for 7500









































Search results

Summary of Contents for 7500

Reviews:

Brands by name

Popular brands

Braeburn 7500, User Manual

Search results

Summary of Contents for 7500

Reviews:

Brands by name

Popular brands