Braebon Ultima 0580A, User Manual, Page: 16 / 28

&RQQHFWLQJWKH8OWLPD'XDO$LUIORZ3UHVVXUH6HQVRUŒ
7RFRQQHFWWR$OLFH5HVSLURQLFV
1. Using the Alice
Interface cable
(Model 0593),
connect a 1 mm
keyhole connector to
each of the outputs
you would like to
record. You may
choose to record
from one to six
outputs.
2. Connect the RCA
connector to the
0586A interface.
3. Plug the RJ11
connectors into your
Alice DC box.
4. Use the recorder
settings listed in
Table 5 Alice
Recorder Settings.
Table 5 Alice Recorder Settings
Channel Output
Low Frequency Filter
(time constant)
High Frequency Filter
Gain/
Sensitivity
Sampling
Rate
Airflow & Snoring Output N/A 70 Hz or higher 7 N/A
Airflow Output N/A 10 Hz or higher 7 N/A
Snoring Output N/A 70 Hz or higher 7 N/A
Dual Pressure Sensor (0585)
Alice DC
box Recording
System
Note: You
can use
one to six
outputs
on the
pressure
sensor.
Dual lumen, oral and nasal
cannula connected to both
the nasal and oral input
Figure 4 Complete Alice Recorder Connection
0586A P
F
S
RJ11
3/32 inch stereo
On the 0586A interface
P = Pure waveform with both airflow &
snoring (Unfiltered)
F = Filtered waveform with airflow only
S = Snoring only
Airflow and Snoring ( Unfiltered)
Airflow (Snoring Filtered Out)
Snoring (Airflow Filtered Out)