Brady Bradyprinter THT 300X-PLUS, Manual

Page: 164 / 180

136 Bradyprinter THT X-Plus II Series User Guide
Specifications
Ribbon Specifications by Model
Ribbon Specifications by Model
Refer to the table that follows for ribbon specifications for your type of printer.
Note • Match the ribbon to the label width and printhead width that you are using.
•
Ribbon must be wound with the coated side out.
•
Ribbon should be at least as wide as the labels to protect the printhead
from excessive wear.
Specifications BP THT
300X-Plus II
BP THT
600X-Plus II
BP THT
360X-Plus II
Printhead
resolution 300 dots/inch
(12 dots/mm) 600 dots/inch
(24 dots/mm) 300 dots/inch
(12 dots/mm)
Ribbon width
Minimum 0.79 in. (20 mm) 0.79 in. (20 mm) 2.0 in. (51 mm)
Ribbon width
Maximum 4.33 in. (110 mm) 3.40 in. (87 mm) 6.7 in. (170 mm)
Standard length
with 2:1 label to
ribbon ratio 984 ft (300 m) 984 ft (300 m) 984 ft (300 m)
Standard length
with 3:1 label to
ribbon ratio 1476 ft (450 m) 1476 ft (450 m) 1476 ft (450 m)
Ribbon core inside
diameter 1.0 in. (25.4 mm) 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)
Maximum ribbon
roll outside
diameter 3.2 in. (81.3 mm) 3.2 in. (81.3 mm) 3.2 in. (81.3 mm)