Brady Bradyprinter THT 300X-PLUS, Manual

Page: 163 / 180

Specifications
Print Specifications by Model
Bradyprinter THT X-Plus II Series User Guide 135
Print Specifications by Model
Refer to the key and the table that follows for printer specifications.
Model Specifications Key
This table contains the key for print specifications for the tables that follow.
Non-Continuous printing (gap, notch, or hole between labels).
Continuous printing (no gap, notch or hole).
Š
Ladder (rotated) orientation.
—
Picket fence (nonrotated) orientation.
Specification BP THT
300X-Plus II
BP THT
600X-Plus II
BP THT
360X-Plus II
H 300 dots/inch
(12 dots/mm) 600 dots/inch
(24 dots/mm) 300 dots/inch
(12 dots/mm)
Dot size
(width×length) 0.0033×0.0039 in.
(0.84×0.100 mm) 0.0016×0.0016 in.
(0.042×0.042 mm) 0.0033×0.0039 in.
(0.84×0.100 mm)
First dot location
(measured from inside
media edge) 0.023 ± 0.035 in.
(0.6 ± 0.9 mm) 0.023 ± 0.035 in.
(0.6 ± 0.9 mm) 0.10 ± 0.035 in.
(2.5 ± 0.89 mm)
Maximum print width 4.09 in. (104 mm) 3.2 in. (81 mm) 6.6 in. (168 mm)
Selectable print
speeds (inches
per second) 2.4, 3 through 8 1.5, 2 through 4 2.4, 3, 4, 5, 6, 7, 8
Maximum Print length 39 in. (991 mm)
100 in. (3810 mm)
39 in. (991 mm)
39 in. (991 mm) 39 in. (991 mm)
100 in. (3810 mm)
Bar code modulus (X)
dimension 3.9 mil to 39 mil Š
3.33 mil to 33 mil —
1.6 mil to 16 mil Š
1.6 mil to 16 mil —
3.9 mil to 39 mil Š
3.33 mil to 33 mil —
Thin film printhead
with Element Energy
Equalizer (E
3
)
®
Yes Yes Yes