Brady Bradyprinter THT 300X-PLUS, Manual

Page: 100 / 180

72 Bradyprinter THT X-Plus II Series User Guide
Front Panel Controls
Overview
Overview
After you have installed the labels and ribbon and printed a configuration label, you
can change the printer’s settings using the front panel controls. For an overview of
the front panel, including descriptions of the buttons and lights, see
Front Panel
on page 3 . If you need to restore the printer to its factory default settings, see FEED
and PAUSE Self Test on page 127 .
Many printer settings may be controlled by your printer’s driver or label preparation
software. Please refer to the driver or software documentation for more information.
Enter Setup Mode
To enter Setup Mode, complete these steps:
1.
Press SETUP/EXIT to enter Setup Mode.
2.
Press either NEXT/SAVE or PREVIOUS to scroll to the parameter that you wish
to set.