Brady BradyPrinter A5500, User Manual

Page: 35 / 72

BradyPrinter A5500 User Manual
28
General Operation
Functions
Functions
Run
Tap
Run
to begin printing and flagging the first job in the print queue. Displayed is the first label in the
first job as well as controls for moving between labels, the ability to change the wire diameter, a mode
indicator, and a counter of labels printed and flagged.
The following table describes the controls and information when running a job.
Note:
The navigation buttons (arrows) are available when the print file contains multiple labels.
CAUTION!
If the wrong label supply for the file is installed, a warning message
is displayed. Use caution when overriding this message. The label
size loaded in the printer may not be appropriate for the print file
and will generate scrap.
Button Description
Goes to the next label.
Goes to the previous label.
Goes to the last label in the file.
Goes to the first label in the file.
Adjust Wire
Diameter
Select the diameter of the wire being flagged or leave it on auto for the printer to
automatically detect the wire diameter.
Next
Shows whether the printer advances to the next label automatically or manually.
Label
Displays the current position in the label file as well as the total number of labels. Tap
the current label number (within the rectangle) to jump to a particular label. A keypad
opens. Tap the label number on the keypad and then tap the enter button.
Reset Count
The number to the left indicates the number of flag labels applied. Tapping Reset
Count resets the number to zero.
Close Job
If the printer is set to repeat printing the same file, click Close Job to stop printing this
file and go to the next file in the print queue.
Enter button.