manualshive.com logo in svg

Brady BBP11-24L, User Manual

Share
Download
Brady BBP11-24L User Manual Download Page 33

 

 

 

BBP11-24L / BBP11-34L   
Bar Code Printer User Manua

l 

 

BBP11 User Manual 

 

27 

Amber   red (5 blinks)   amber (5 blinks)   green (5 blinks)   green/amber (5 
blinks)   

red/amber (5 blinks)

   solid green 

 

4.3.6 Skip AUTO.BAS 

 

TSPL2 programming language allows user to download an auto execution file to flash 
memory. Printer will run the AUTO.BAS program immediately when turning on printer 
power. The AUTO.BAS program can be interrupted without running the program by the 
power-on utility. 
 
Please follow the procedures below to skip an AUTO.BAS program.

 

1. Turn off printer power.

 

2. Press the FEED button and then turn on power.

 

3. Release the FEED button when LED becomes 

solid green

. 

  The LED color will be changed as following:   

Amber   red (5 blinks)   amber (5 blinks)   green (5 blinks)   green/amber (5 
blinks)   red/amber (5 blinks)   

solid green

 

4. Printer will be interrupted to run the AUTO.BAS program. 

 

Summary of Contents for BBP11-24L









































Reviews:

No comments

Brands by name

Popular brands

Load more brands