Brady BBP 85, Tutorial, Page: 5 / 18

2 BBP
®
85 Label Printer Tutorial
Lesson 1: Creating a Simple Text Label
Lesson 1: Creating a Simple Text Label
This lesson shows you how to create a simple label, adding formatting attributes
and revising the label before printing. For more information on the techniques
used in this lesson, see
“Create Labels” on page 3-1 and “Printing Labels” on
page 5-3 of the user’s manual.
Note: Whenever there is text that you should enter, the word is highlighted in
Blue
.
All other actions are highlighted in bold .
Enter Text
1. From the Home page, type:
EXIT
. The text size is maximized to fit the entire
width of the installed tape (e.g., 252 pts).
2. Add a new line by pressing Enter . The text size is reduced so that both lines
will fit the entire width of the installed tape (e.g., 126 pts).
3. On the second line, type:
LEFT
.
Change Font Size
To decrease the font size:
1. Touch Size twice. Each time you press the button, the font size will
change. For example, if the font size was 126 pts to start, pressing Size twice
will reduce it to 80 pts.
Note: The and size buttons change the font size for all of the text in the
text object.
To change font size for one word in a text object:
1. Touch the word Exit .
2. Touch Font
3. In the Size dialog, type:
100
(pts).
4. Select OK or press Enter .