2
Ligature Resistant Showerhead
Installation
7/2/2013
Bradley •
215-1780 Rev. B; ECN 13-03-009
Supplies Required:
• Security Sealant
• 1/4" Tamper Resistant Button Screws with Security Pin (4)
• Anchors for 1/4" Screws (4)
• Water supply piping to connect 1/2" NPT
Rough-in
1
A
Rough-in the supply piping as
required for your installation.
Finished Wall
1/2" NPT
Female
Install Showerhead
2
A
Determine mounting location.
Use showerhead as template
to mark the four mounting hole
locations.
B
Install wall anchors (supplied
by installer) for 1/4" screws
at the marked anchor hole
locations.
C
Secure the showerhead to the
wall anchors with 1/4" screws
(supplied by installer).
E
D
Apply security sealant
completely around
showerhead after installation.
Ensure proper shower head
adjustment and tightening of
screws.
WARNING! After installation, all joints require security
sealant (by installer) to eliminate gaps (if
present) between wall and fixture.
Back side
of
showerhead
