11
Bradley Corporation
215-857 Rev. B; EN 97-1016
Bradley LavCare 500 Series Patient Care Module
Installation Instructions
Model LC500 L/F and L/W
LC500 Module Cleaning and Maintenance
Regular cleaning greatly prolongs the service life of stainless steel and Brad-glazed fixtures and, at the
same time, helps to maintain a pleasing surface appearance. The amount and frequency of cleaning
depends on the service conditions involved. For best results, fixtures should be cleaned as often as
films or deposits become apparent. This will remove built-up deposits which may eventually cause
concentration cells to set on the surface.
CAUTION: USING CLEANERS THAT CONTAIN HARSH CHEMICALS,
ABRASIVES, ACIDS OR DISINFECTANTS, OR CLEANING
WITH STEEL WOOL OR BRUSHES, WILL RESULT IN DAMAGE
TO THE FIXTURES SURFACE. ALWAYS READ THE LABEL
ON ANY CLEANING PRODUCT BEFORE APPLYING TO YOUR
BRAD-GLAZED OR STAINLESS STEEL FIXTURE.
Cleanliness is of utmost importance. Ordinary deposits of dirt and grease can be quickly removed with
soap and water. To properly clean your LC500,
give the Brad-glazed fixture a thorough cleaning with a non-abrasive liquid tub-and-tile
cleaner to remove soil and maintain the glossy finish
You may safely use the following cleaners*:
Formula 409®
Spic and Span® Powder
Liquid Comet®
Mr. Clean®
Soft Scrub®
Windex®
Glass Plus®
DO NOT
use the following:
Whitecap®
Lysol® Disinfectant Spray
Lestoil®
Dow® Disinfectant Bathroom Cleaner
Pinesol®
acetone
alcohol
steel wool/steel brushes
remove all material and deposits that tend to adhere to the Brad-glazed surface, taking special
note of crevices and corners
remove all material and deposits that tend to adhere to the stainless steel surface with stainless
steel polishing powder (always rub in the direction of the polishing lines)
check for rust spots or streaks on the stainless steel surface and look for the source of the rust
(a steel nail located in some iron or steel not actually a part of the stainless steel fixture may
be the cause)
rinse the Brad-glazed and stainless steel surfaces thoroughly and dry completely after washing.
*NOTE: Use of proprietary cleanser names is intended only to suggest a type of cleanser and
does not constitute endorsement. Omission of any proprietary cleanser name is not
meant to imply its inadequacy.
