3
Installation
HN-200 Recess-Mounted Shower
Bradley •
215-741 Rev. C; ECN 15-03-004
4/29/2015
Pre-Installation Information
Material
Control Panel Material: The shower control panel is constructed of 14-gauge type 304 stainless steel .
Valve and Component Material: All exposed parts (except seat cover) are stainless steel or polished chrome-plated
brass . Valve bodies are brass casting .
Supplies Required
• Wall anchors to mount HN-200 shower panel on wall (supplied by installer)
• 1/2" IPS hot (or 1/2" IPS tempered) and cold water supply
• (6) wall anchors for 1/4"-20 x 1-1/4" screws to mount grab bar on wall of shower stall
The HN-200 shower is furnished assembled for job site installation. Particular care must be taken by the
contractor for proper height placement of the shower. Always check local codes for compliance.
Dimensions
60" (1524mm)
Min Clear Face
of Finish to Face
of Finish
30"
(762mm)
Min
36"
(914 mm)
15"
(381 mm)
Level and Clear Area
Optional 9562
Shower Seat
Optional L-Shaped
Grab Bar
4"
(102 mm)
