Installation
AV90
Bradley
• 215-1773 Rev. D; ECN 13-08-028
1/21/2014
3
IMPORTANT!
Read this entire installation manual to ensure proper installation. When finished with the
installation, file this manual with the owner or maintenance department. Compliance and
conformity to local codes and ordinances is the responsibility of the installer. Product
warranties may be found under “Products” on our Web site at bradleycorp.com.
Separate parts from packaging and make sure all parts are accounted for before discarding
any packaging material. If any parts are missing, do not begin installation until you obtain the
missing parts.
Make sure that all water supply lines have been flushed and then completely turned off before
beginning installation. Debris in supply lines can cause valves to malfunction.
Hardware supplied by installer must be appropriate for wall construction. Wall anchors used
must have a minimum pull-out rating of 1,000 lbs.
Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to
installation. Electrical power MUST remain off until installation is completed. After installation
is complete, turn on the water supply first, then turn on the electrical power.
WARNING!
To Reduce The Risk Of Fire Or Electric Shock,
DO NOT
Use This Fan With Any Solid-State Speed Control Device!!
NOTICE
With supervision or instruction, this device may be used by
preschool aged children and persons with special needs.
This is not a toy. Cleaning and maintenance shall only
be performed by qualified personnel.
Installation
THIS
SIDE
UP
Packing List
•
•
•
•
