background image

How to Assemble the

Bradley Digital Smoker®

1. Remove smoker from box.
2. Take all packaged parts out of

smoker.

3. Remove all protective packaging

Install Digital Smoke Generator:

• Attach digital smoke generator (1) 

to the smoker tower (2) by placing 
the Bisquette Burner (E) through 
the left side opening of the tower.  
Align the generator keyholes to the 
two supports (3) on the side and 
push down to secure in position. 

•Insert the feeder tube (4) into 

the top of the smoke generator.  

Push down firmly.  Load with 

desired number of Bradley Flavor 
Bisquettes®.

Electrical Connection Set Up 

(see page 12)

Plug the Sensor Cable (1) into the 

back of the Smoke Generator (A) 
and Smoker (B).

• Plug the Short Jumper Cord 

(2) into the back of the Smoke 
Generator (D) and then into the 
back of the Smoke Tower (C).

• Plug the Long Power Cord (3) into 

the power receptacle (E).

Set Up Smoker Tower:

• Place Racks, either four or six (B) 

onto side supports.

• Place Drip Tray (A) “V” facing 

down beneath the Racks on the 
brass side pins (I).
Place the Rectangular Tray (D) on 
the bottom of the Smoker.

• Fill the Drip Bowl (C) half full 

with water and place in the center 
of Rectangular Tray to catch burnt 
Bisquettes.  During a long smoking 
period, the Drip Bowl will require 
changing the water.

• Plug the Long Power Cord (3) 

from the Smoke Generator into an 
approved grounded electrical outlet 
(4).  (see page 12)

To Remove Smoke Generator 

(see page 12)

• Make sure the Smoke Generator 

has had time to cool down.  Unplug 

Long Power Cord from the wall 

outlet (4) and from the Smoke 
Generator (3).  Detach Sensor Cable 
(1) and Short Jumper Cord (2) 
and then remove Smoke Generator 
from the Smoker Tower by raising 
it gently upward and pulling it 
outward.

A

ssembly

 I

nstructIons

4 Rack Digital Smoker (Model: BTDS76P; BTDS76CE-EU)

6 Rack Digital Smokers (Model: BTDS108P; BTDS108CE-EU)

For Original Black Smoker and Stainless Steel Smoker Assembly Instructions See Page 5

Refer to Part Numbers in External Components List, Internal Components List and Electrical 

Connection Set Up

9

Summary of Contents for BTDS108CE-EU
















Reviews: