31
Step 3: Press “SET” button for new setting to take effect immediately. “Setpoint” will stop flashing. If the “SET” button is not
pressed, the new temperature setting will take effect in approximately 10 seconds.
To Decrease Setpoint Temperature
Step 1: Depress and hold “Temperature Down” button until desired setpoint temperature appears in the display.
Step 2: “Setpoint” indicator begins flashing in the display after pressing “Temperature Down” button.
SELECT
SET
Status
°F
idl
e
Operational
Step 1
SELEC
T
SET
Status
°F
idle
setpoin
t
Operational
"Setpoint"
flashes
Step 2
SELECT
SET
Status
°F
idle
setpoint
Operational
Press SET Button for setting to
to take effect immediately
Step 3
"Setpoint" flashes
for 10 seconds
