Bradco CONTRACTOR 408A BACKHOE, Operator'S & Parts Manual, Page: 10 / 142

5. Block off work area from all bystanders, livestock, etc. Allow plenty of
room for backhoe reach and swing.
6. When operating on slopes, dig with the backhoe uphill, and avoid full
reach and swinging the backhoe bucket to the downhill side. Tipping
could result.
7. Operate backhoe only from backhoe seat.
8. Use your backhoe only for digging. Do not use it to pull things, as a
battering ram, or attach ropes, chains, etc., to the unit.
9. Never work under raised stabilizers or a raised bucket.
10. Lower stabilizers and bucket when removing backhoe. This will
increase the stability of the unit.
11. Do not dig close to stabilizers, the ground could collapse from under
the backhoe
12. Do not lift loads in excess of backhoe capacity.
13. Always lower the backhoe bucket and stabilizers to the ground, shut
off engine, remove key, and apply the parking brake before leaving
the unit unattended.
TRANSPORTING THE BACKHOE
1. Be sure to engage the boom lock and swing lock before transporting
backhoe. Failure to do so could cause an unstable traveling
condition.
2. Allow for height of backhoe when transporting backhoe so as not to
catch unit on low overhangs or wires.
3. When driving on public roads use safety lights, reflectors, Slow
Moving Vehicle signs, etc., to prevent accidents. Check with local
governments for regulations that may affect you.
4. Do not drive close to ditches, excavations, etc., cave in could result.
Drive slow over rough terrain.
5898
9-2-92
SAFETY PRECAUTIONS
B B