
7
DRY IRONING
•
For ironing without steam, follow the instruction in section ‘steam ironing’, however, the Steam
Control Knob should remain in the ‘OFF’ position (no steam).
ANTI-CALC SYSTEM
•
A special filter inside the water tank softens the water and prevents scale build
up in the
soleplate. The filter is permanent and does not need replacing.
NOTE:
Use tap water only. Distilled and demineralized water makes the anti
calc system ineffective
by altering its physicochemical characteristics.
ANTI-DRIPPING SYSTEM
•
This Digital Iron is equipped with a ‘drip stop’ function: the Digital Iron automatically stops
steaming when the temperature is too low to prevent water from dripping out of the soleplate.
•
With the anti
dripping system you can iron even the most delicate of fabrics.
SELF-CLEANING SYSTEM
The self
cleaning feature cleans the inside of the soleplate, removing impurities.
We recommend using it every 10
15 days.
•
Set the steam control switch to the OFF position (no steam).
•
Fill the water tank to the MAX level.
•
Set the temperature control to MAX heat temperature.
•
Plug the Iron into the electrical socket.
•
Place the Iron upright on a level, sturdy surface.
•
Wait for the pilot light to turn off.
•
Unplug the Iron from the electrical socket.
•
Hold the Iron in a horizontal position over a sink.
•
Press the Self
Cleaning button down until the boiling water, steam and impurities come out of
the holes in the soleplate.
•
When the soleplate has cooled down, wipe it with a damp cloth.
AUTO SHUT-OFF
•
An electronic safety device will automatically switch the heating element off if the Digital Iron
has not been moved for more than 30 seconds in a horizontal position. If in a vertical position,
this will happen after 8 minutes. To indicate that the heating element has been switched off, the
LCD screen will start blinking.
•
When picking up the Digital Iron again, the LCD screen will stop blinking. The words on the LCD
screen start blinking. This indicates that the Digital Iron is heating up again.
•
Wait for the words to stop blinking. The Digital Iron will be ready for use once again.