5
HOW TO USE YOUR STAINLESS STEEL JUICE EXTRACTOR:
1.
Prepare the food to be used. Wash fruit or vegetables thoroughly. Remove all seeds and stems
(larger and smaller ones) Fruit such as pineapples must be peeled.
2.
DO NOT USE
this Juice Extractor to extract juice from citrus fruit such as oranges as it could
cause a blockage in the blade unit.
3.
The amount of juice that is extracted depends on the type of fruit or vegetable that is used.
4.
Place cut food into the feeding chute and press slowly with the pusher.
NOTE:
Use the ‘-‘ switch if working with soft food such as melon, cucumber, tomatoes, pineapple etc.
Use the ‘+’ switch if working harder food such as carrots, apples, celery, beet etc.
5.
Repeat the process, filling the juice jug each time, until you have the desired amount of juice.
6.
DO NOT use the Juice Extractor for more than 2 minutes continuously.
7.
Periodically switch OFF the unit to check if any fruit or vegetable debris may have become stuck
which could cause a blockage. Unplug the unit and dislodge any blockage before operating the
motor once more and continuing with the juice extraction.
8.
Sometimes the juice spout may drip some left-over juice. For this reason place a small dish or
paper towel under the spout once the juice jug is removed.
9.
After use, switch the unit OFF, remove it from the mains electrical supply and carefully remove
the transparent cover, the blade unit, the middle body spout unit and the pulp container and
discard all the pulp before washing these items in warm soapy water.
The main function of the Juice Extractor is to extract juice from fruit such as apples and melons and
vegetables such as carrots and cucumbers.
ASSEMBLING YOUR STAINLESS STEEL JUICE EXTRACTOR:
Wash all the parts that make contact with the food. (parts 1,2,3,4,12)
Make sure that the unit is unplugged before assembling.
1.
Place the transparent middle body with spout (4) onto the main body (8).
