SOF1WARE I NSTALLATION
133-P1970Q-002 64M DDR 200M/250E
Welcome ta SmartFlrmware(tm) for bplan Pega.!io:::: ver::::lon
a
Ibl07 (20020919142323)
SrnartFl rmware
(trn)
Copyrlght 1996-2001 by CodeGen, lnc
AlI
R1ght:::: Re::::erved
Pega:::lO:::
BIO!;
Exten::::lon::: CopyrIght 2001-2003 by bplan
GmbH
AlI
Ihght::: Re::::erved
ok
When you switch on your Pegasos it will greet you with the Smart Firmware
screen. When the "ok" prompt appears, the system is ready to accept your
commands.
Step
1
-
Booting from
CD
1 .
Insert the MorphOSBoot-CD in your CD drive. (If you have more than
one, put it in the first CD drive. If you are unsure which one that is,
sim ply try putting the CD in each CD drive and try to complete the next
two steps.)
2.
List the CD content by typing
Is /pcVide/cd
and press the ENTER key.
This will show if your CD drive works as expected. (You may press F9 in
order to switch to a smaller font size so you can see more text on the
screen. Pressing F6 will switch back to the bigger font size.)
3. Next, type
boot /pcVide/cd boot.img
and press the ENTER key.
MorphOS should now successfully boot from CD and load the Ambient
environment.
Step
2
-
Configuring a Harddisk
14
1.
Double-click the CD icon in Ambient.
2.
Open the ''Tools'' fol der with a double-click on it. Execute the program
"SCSlconfig" by double-clicking on its icon.
3.
Select the "ide.device" in the "SCSI Controller" list. There should appear
at least two devices in the "SCSI Drives" list. One of them is your
harddisk, the other one is your CD drive.
Write down the unit number
of
your hard drive, you will need it later
o
n
.
4.
Now, select your harddisk and click on the "Partition» button. The
"Partition List" will then pop up. If your hard drive is new, there should