3. INSTALLATION
3.1
Inspecting the packing carton for damage that may have occurred while in transit. Immediately
notify the carrier and place of purchase if any damage is found. Retain the package for future use.
3.2 The packing of the UPS is separated into 3 units, main unit weight 39kgs, & 2 units of battery set
weight 18kgs of each. Each battery set contains 6pcs of 12V battery. To move these units, main
unit needs 2-3 persons; while each battery set can be moved by one person.
3.3 To install the UPS, please fix the main unit first; then, put on the battery set one by one, and finish
the connection (Ref.
3.6); finally make connection for input and output of the UPS.
3.4 The UPS can be used as a rack-mount unit, or a tower one. Please follow the steps to make it
as a rack-mount unit or a tower one as below
：
3.4.1 Tower type ---
To screw on the rubber pad (6pcs, as enclosed) at the
bottom side of the unit; or put on 4 wheels (optional).
Bottom side (with pads,
or wheels/optional)
3.4.2 Rack mount type ---
To screw on the handling ears as a regular rack mount
unit, put it on the rack, and fix it.
3.5 Adjust the display panel between tower & rack mount types, you can make it easily simply by
screwing on/off the 4 screws around the display panel with 90° turning on the panel.
9
