manualshive.com logo in svg

boytone BT-37M-C, Operating Instructions Manual, Page: 15 / 17

Share
Download
boytone BT-37M-C Operating Instructions Manual Download Page 15

1.

 

Insert a USB storage device and SD/MMC card, then select USB/SD mode (as described 

previously).  

2.

 

Press the record 

REC 

button during playback of the track you want to copy: 

“

ONE

”

 will be 

flashing on the display. Press the record 

REC 

button again to confirm.  

3.

 

The USB or SD icon will be flashing on the display while the system is copying the file.  

4.

 

Once the file has been copied, the unit will stop playback automatically. 

“

END

”

 will be shown 

on the display and the system will revert to USB or SD mode.  

Copying a folder

  

1.

 

Insert a USB storage device and SD card, then select USB/SD mode (as described previously).  

When the system has recognised the device, press the stop button.  

2.

 

Turn the tuning knob to select the desired folder for copying.  

3.

 

Press the record 

REC 

button: 

“

ONE

”

 will be flashing on the display. Press the 

SKIP UP 

or 

SKIP 

DOWN 

button to select 

“

FOL

”

 (folder) on the display. Press the record 

REC 

button again to 

confirm.  

4.

 

The USB or SD icon will be flashing on the display while the system is copying the folder.  

5.

 

When the folder has been copied, the USB or SD icon will stop flashing on the display.  

Copying all files/tracks

  

1.

 

Insert a USB storage device and SD card, then select USB/SD mode (as described previously). 

When the system has recognised the device, press the stop button.  

2.

 

Press the record 

REC 

button: 

“

ONE

”

 will be flashing on the display. Press the 

SKIP UP 

or 

SKIP 

DOWN 

button to select 

“

ALL

”

 on the display. Press the record 

REC 

button again to confirm.  

3.

 

The USB or SD icon will be flashing on the display while the system is copying the files/tracks.   

4.

 

When all files/tracks have been copied, the USB or SD icon will stop flashing on the display. 

NOTE: 

If you press the record 

REC 

button during playback in USB or SD mode, the file will 

copy from USB to SD or vice versa.  

Deleting files from the USB device / SD card

 

 

The system is able to erase files stored on the USB drive or SD card. You can delete a single 

file/track, a folder of files/tracks, or all files/tracks on the storage medium.  

Summary of Contents for BT-37M-C


















Reviews:

No comments