The auxiliary input
Listening to a CD (or other auxiliary input)
1.
Turn the volume knob clockwise to turn the equipment on.
2.
Use the function selector to select AUX mode, then connect the external audio device (such as
a CD player) to the AUX IN socket at the front of the equipment. The audio signal from the
external audio device will now be played through the system.
3.
If an external audio device is connected to the AUX IN socket, playing of the auxiliary device
takes priority over cassette playback.
AUX IN encoding
1.
Use the function selector to select AUX mode and then insert a memory device (USB drive, SD
or MMC card).
2.
Press the record
REC
button, it will take 3 - 4 seconds to read the memory device, then the
USB or SD icon will be flashing on the LC display.
3.
Press the skip up or skip down button to select the desired mode (USB or SD) for encoding,
then press the record
REC
button again to confirm.(You can skip this step if only a USB drive
or an SD/MMC card is inserted.)
4.
The system will start the encoding mode after a few seconds. During encoding, the USB or SD
icon will be flashing on the display.
5.
To finish encoding, press the stop button. The display will show
“
END
”
and return to AUX
mode.
NOTE
:
•
The recording speed is 1:1. Recording will take as long as playing the CD (or other auxiliary
input).
•
The recording format is preset at MP3 bit rate 128 kbps.
