background image

 

Away from heat sources, radiators or other products that produce heat.  

 

Away from areas with high temperatures, high humidity or direct sunlight.  

 

Away from excess dirt and dust.  

 

Away from open windows and any place where water may get into the unit and damage it.  

 

Make sure there is free circulation of air around the unit. Do not place it on a thick carpet, bed or any 

place where ventilation holes are obstructed. Leave at least 10cm clearance around the unit.  

 

Make sure the mains socket is readily accessible at all times. 

Usage conditions and restrictions

 

 

 

Openings  on  the cabinet are provided for ventilation and to protect  the unit from overheating. To 

ensure proper operation, do not cover them with things such as newspapers, tablecloths, curtains etc.  

 

Do not place heavy objects on top of the equipment or step on it.  

 

Do not place objects filled with water (such as vases) or any naked flame sources (such as lit candles, 

incense sticks or cigarettes) on top of the unit.  

 

The equipment is not intended for use by persons (including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a person responsible for their safety.  

 

Young children should be supervised to ensure they do not play with the equipment. Close supervision 

is always necessary when an appliance is used by or near children.  

 

Unplug the unit from the power outlet before cleaning.   

 

Clean the unit only with a dry, clean cloth. Do not use liquid or aerosol cleaners.  

 

We assume no liability for any damage caused by non-compliance with these instructions or any other 

improper use or mishandling of the equipment.  

  

 

 

 

 

 

 

 

 

Summary of Contents for BT-24DJB

















Reviews: