Press the REC/OK button to select your desired settings. The available options include:
• 1 Minutes-
Enables the DVR to record/overwrite in 1 minute increments
• 3 Minutes
(default)- Enables the DVR to record/overwrite in 3 minute increments
• 5 Minutes
–
Enables the DVR to record/overwrite in 5 minute increments
NOTE:
The recording time shows by the upper right corner of screen (when recording) indicate the
current total recording time, not the segment length.
MOTION DETECTION
The motion detection option is used to enable/disable motion detection recording. While the
VTR7G
is on, and the
VTR7G
is on standby, any movement in front of it will trigger a recording.
The Motion Detection feature consists of the following options:
• Off/Disable(
default)
• On/Enable
NOTE:
Make sure the
“
Auto Power Off
”
function is set to
“
Off
”
to let the
VTR7G
stay on during
standby mode. When motion detection is active or turned ON, the G sensing will be deactivated.
Please make sure motion detection is turned OFF for G-sensor to function properly.
VIDEO RECORD MODE
The video record mode option is used to enable / disable the audio recording along with video
recording. The Video Record Mode feature consists of the following options:
• Video + Audio / Enable (
default)
• Video /Disable
NOTE:
The Audio recording can be switched on / off manually by pressing
“
Menu
”
button during
recording.
G-SENSOR SENSIVITY
The G-Sensor option is used to enable/disable the
VTR7G
’
s G-force/impact sensor which will lock
the previous and current file from being deleted by the overwrite feature. The G-force acts as a
sensor for the
VTR7G
to secure any video files recorded in the event that the vehicle gets hit. Any
force that is acted upon the vehicle will result in locking the current recording video file.
NOTE:
Formatting the SD card will result in erasing all files, including the locked video files.
The G-Sensor feature consists of the following options:
-15-