3. Installation
1)
Take off the adhesive tape from the magnetic holder.
Attach the magnetic holder on the windshield of the car.
Also attach the metal plate on the device.
Note - Magnetic holder is optional and may not
come with it, depending on countries. If it does not
come in the package, take off the adhesive tape
from the device and attach it on the windshield of
the car directly
2) Using the knob, check the direction
where you want to record, fasten
the knob
3) After inserting microSD card into slot,
connect the supplied cigar jack to the port.
Attached the device on the magnetic
holder.
*
Caution
Be sure to use the supplied cigar
jack, otherwise, the device
may be damaged and does not work.
4) Power "ON".
Recording begins automatically if the car starts.