09
12
COMPASS
In the main interface touch [COMPASS] icon, into a compass interface.
COUNTER
In the main interface touch [COUNTER] icon, into the counter interface.
3. Satellite receiver
Navigation system can keep receiving eight satellite signals. As a general rule, the navigation system
can figure out your accurate location after received 3-4 satellite signals. But sometimes, weather and
tall buildings in the city shall affect the signal receiving effect, as is shown in following figure:
GPS Navigation Function Operation
1. Navigation Function Operation
For detailed operation of navigation function, see “Navigation Operation Manual”.
In tune
Among tall buildings
At the boulevard
The antenna is sheltered
Underground parking
Overpass or viaduct
2. Receiving signal error
When the satellite signals can be normally received, the error of standard GPS shall be about 7 meters, Driving on parallel sections,
there shall be error even the product has auto-correct function. The normal receiving of satellite signals shall be affected and cause
error in following environment.
Forward/Backward play
Click the button, forward/backward play.
The previous/next song
The previous/next song
Click the button,
.
Channel conversion
Click
Switchable channel
the button,
.
Back to Root Menu
Click the button the DVD state can return to the root menu of
the disc, VCD state can enter the PBC menu and playback.
Access title menu
Press this button to return to title menu of the disk. Directly click
menu bar at title menu interface for playing.
During VCD playing, this function only works when PBC is off.
Repeat play
In playing state, touch this button to start repeat play function:
Chapter repeat
→
Title repeat
Off.
→
Entire disc repeat
→
Language Selection
can switch subtitle language.
Touch the button,
Note: the need to support the the subtitle language discs have
this feature
Number Button
Click the button, pop-up numeric keypad. By click the numeric
keypad for direct selections played.
U Disc/SD Card function operation
When there is a USB device/SD card connected, the unit can conduct the playback of
Insert/Eject USB storage device
1. Connect a U disc recorded with media information to the unit by a USB connecting cable.
2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device.
Insert/eject SD card
1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked.
2.
Enter/exit
Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD
card, touch
[USB]
icon in the multimedia interface to enter into the external storage playback interface; Touch
[SD]
icon to enter into
the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menu
to perform various playback controls.
audio/video/image files in the USB device/SD card.
When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking.
Play
After SD card/USB removable device being read out, the operation methods are similar to disk operation methods.
