Boynq Wake Up, Manual

Page: 5 / 29

Manual WakeUp™ english
Congratulations on purchasing your new high-quality ‘Made for iPod
’
, stereo speaker
& Alarm clock with integrated docking station, better known as the “ WakeUp
TM
” by
boynq
®
.
Quick start
The WakeUp
TM
is very easy in use. Just follows the steps below and be ready to enjoy!
Step 1) Connect the AC adaptor to the back of the WakeUp
TM
and the other end into a
wall socket and press the on/off button.
Step 2) Set the clock to the correct time
Step 3) Take out the remote control and insert the correct insert matching your iPod
Step 4) Insert your iPod (please remove any ‘skin’ or case before inserting to prevent
damage on the WakeUp
TM
or iPod)
Step 5) Select ‘iPod’ as audio source for the speakers, select your favorite tune on your
iPod and press play.
Step 6) Enjoy!
Contents of the box:
WakeUp
TM
WakeUp
TM
remote control
6 docking inserts; iPod video 30GB / iPod Video 60, 80GB / iPod nano 1
st
& 2
nd
generation / iPod 10, 15, 20GB models / iPod mini
Line-in cable (45 cm, 3.5mm jack to 3.5mm jack) / FM antenna
Line-out cable (100 cm, 3.5mm jack to double cinch)
Power adapter
Instruction manual
Equalizer Card
Product details:
Volume control, turn to adjust the volume (volume range is 00-40)
Treble control switch, turn to adjust the treble sound settings
Bass control switch, turn to adjust the bass sound settings
On/off button, push for switching the WakeUp
TM
on/off
iPod dock connector (male 30-pin)
Left integrated speaker (10W, 4 Ohm)
Right integrated speaker (10W, 4 Ohm)
Line-in connection (3,5mm), to connect auxiliary sound devices to the WakeUp
TM
Line-out connection (3,5mm), to connect the WakeUp
TM
to your Home stereo
installation
iPod dock connector (female 30-pin), to enable data synchronization between
the iPod and the computer
DC power jack
FM Radio Control buttons
Source, Brightness & Sleep Control buttons
Alarm/Set & Clock setting Controls
Remote Control
Radio Display LCD
Hour Display LCD
Minute Display LCD
Basic Operation:
Standby/on off
Press the power button on the WakeUp
TM
to put the WakeUp
TM
to sleep, press again
to wake. The WakeUp
TM
can also be switched on and off via the remote control by
keeping the Snooze button pressed for 5 sec.
Note: when the WakeUp
TM
is in Standby mode you can set the alarm without needing to switch the
WakeUp
TM
on.
A.
B.
C.
D.
E.
F.
G.
H.
1)
2)
3)
4)
5)
6)
)
8)
9)
10)
11)
12)
13)
14)
15)
16)
1)
18)
•
Setting the time: Please note time will be displayed in 24H mode.
Press & Hold HOUR or MIN until the Hour and Min display flashes. Press HOUR and
MIN to set the time, after the time is set, wait for 5 sec without pressing a button to
confirm the time.
Selecting Audio Source:
Press the SOURCE button to cycle through the selectable audio sources:
iPod -> Radio -> Aux (line in) -> iPod
Volume
The ring around the Radio Display LCD is the Volume control of the WakeUp
TM
, turn
clockwise to increase the Volume output and counter-clockwise to reduce.
Adjust the EQ setting:
To adjust the EQ setting of the WakeUp
TM
to your preference simply turn the Bass
Ring (Hour Display LCD) and the Treble (Minute Display LCD). Clockwise will increase
the Treble and Bass intensity, counter-clockwise will reduce the intensity.
Note: Our team of Sound Technicians have prepared a special Equalizer Card that can help you to adjust
and optimize the bass and treble settings to different styles of music.
Audio Souces:
iPod
To enable playback from the iPod press SOURCE until iPod lights up. Select a song
on your iPod and press play.
Press NEXT or PREVIOUS to select a different song. Please use the iPod controls
when more detailed menu navigation is desired.
Radio:
To enable Radio playback press
SOURCE
until Radio lights up. The Radio Display
LCD will light up with the selected FM Frequency.
Press NEXT or PREV to manually select a frequency (frequency will increase or
decrease by 0.1MHz)
Keep NEXT or PREV pressed to automatically search the next or previous
available Radio Channel.
The WakeUp
TM
has 9 memory positions for Radio channels, press
PRESET
to
cycle through the programmed channels
If a Channel which is found during manual or automatic search is stored on a
Preset, FM and the corresponding preset number will blink in the display.
To store a frequency, please select a frequency and press PRESET until the
Preset Number flashes. Select the desired preset number by NEXT and PREV .
Press PRESET to final confirm to store the channel on the selected preset. A
frequency can only be stored once.
Note: To improve radio reception please connect the Line in cable to the WakeUpTM, the line-in
cable doubles as an FM antenna.
Aux (line-in)
Connect an auxiliary audio device to the Line-in connection on the back of the
WakeUp
TM
and press SOURCE to select AUX.
Audio playback through the WakeUp
TM
speaker system is now activated.
Alarm:
To set the Alarm, please press and hold ALARM/SET until the Alarm flashes in the
display. The alarm time (
HOUR MIN
), audio Source (
SOURCE
) and volume for
alarm can now be set. Press
ALARM/SET
to confirm the Alarm configuration and
Alarm will light up in the display. To disable the alarm please press Alarm.
•
•
•
•
•
•
1)
2)
3)
4)
5)
6)
•
•
Manual WakeUp™ english
4 5