Basic safety advice
5
Sprühboy 14 Airmix Edition 05.07
2.3 Designated
use
The usual application for which the
Sprühboy 14
Airmix
is exclusively designated is the non-fogging
spraying of all types of parting agents in baking
factories. Viscuous parting agents or emulsions are
used as baking parting agents. Spraying of other
agents, apart from air and water to clean the
implement, requires the prior explicit written
permission of Messrs. boyens backservice GmbH.
Any use beyond the one stipulated above shall be
considered improper. The manufacturer does not
accept any liability for personal injuries and damage
to property resulting from this. The operator himself
carries the full risk for this.
Designated use also means:
observing all the information in the operating
instructions and
adhering to the inspection and maintenance work.
2.4 Improper
use
Using the implement for other purposes than
stipulated above is prohibited. In case of improper
use, danger for human beings and animals may
result. Such improper using includes, e. g.:
heating or spraying of, e. g. acids and solvent
agents or
other liquids, especially inflammable ones.
2.5
Informing safety measures
Always keep the instruction manual on the
implement. In addition make available and observe
the generally and locally applicable accident
prevention and environmental protection advice.
Further more adhere to the general health- and
labour medical regulations and hygienic precautions.
Keep all safety- and danger hints on the implement
readable and clean and exchange if necessary.
2.6
Training the personnel
Only trained and advised personnel may operate this
implement. The responsibility of the personnel must
be clearly determined for operating, conversion and
maintenance. Semi-skilled personnel may only
operate the implement under supervision of an
expert.
2.7
Safety measures during common
operation
Only operate the implement with all guards fully
functioning. Check the implement for externally
noticeable damage at least once a day.
Never leave your implement unattended while the
implement is connected to a compressed-air system.
During the spraying interruptions protect the spraying
gun against unintended spraying.
Do not drag the implement along behind you by the
agent hose. Protect the agent hose against heat
sources and sharp edges.
Only spray aiming at the baking tins, baking trays or
bakery products, never aiming at people or animals.
Keep children, animals and other persons away from
the operation area of the implement - always ensure
a sufficient clearance.
2.8
Danger from residual energy
Be aware of pneumatic residual energies on the
implement and take corresponding measures in this
connection when instructing operating personnel.
Detailed information will once more be given in the
respective chapters of this instruction manual.
2.9
Cleaning, maintenance, repair and
remedy of faults
Carry out prescribed cleaning, maintenance and
inspection work in due time. Prior to all maintenance,
inspection and repair work
disconnect the
Sprühboy 14 Airmix
from the
compressed air supply and afterwards
actuate the spray gun, and thus discharge the
residual air pressure in the system.
Check the firm seat of screw connections that have
been unscrewed beforehand. On completion of
maintenance work, check the function of all safety
devices.
