26
Cleaning, maintenance and maintaining
Jelly power pack Edition 09.09
5.2
Cleaning the agent-nozzle
- Secure the spray gun by means of the locking
device (1) against unintended spraying.
- Manually slacken the bayonet cap (2) and
remove.
- Remove the agent-nozzle from the bayonet cap.
- Clean the agent-nozzle using hot water.
- Re-insert the agent-nozzle into the bayonet cap.
- Screw the bayonet cap back onto the spray gun.
5.3
Maintenance
5.3.1
Weekly
Check the hinged joint (1) between the spray gun
(2) and the agent-hose (3) at least once a week.
The hinged joint could become bent if
you accidentally drop the spray gun (2).
Immediately replace a bent hinged joint,
as hot jelly can leak from it.
This hinged joint (1) is o.k. This hinged joint (2) is
bent and needs to be urgently replaced.
Summary of Contents for Jelly power pack
