24
Cleaning, maintenance and maintaining
Jelly power pack Edition 09.09
5.
Cleaning, maintenance and
maintaining
Carry out prescribed cleaning and
maintenance work in due time. Prior to
all cleaning and maintenance work:
•
pull the CEE-power plug out of the
socket,
•
separate the implement from the
external compressed air source,
•
actuate the spray gun and thus
discharge the residual air pressure in
the system,
•
when disposing condensate, observe
the
prescriptions
of
the
water
resources law.
Check
the
firm
seat
of
screw
connections that have been unscrewed
beforehand.
On
completion
of
maintenance work, check the function of
all safety devices.
Most malfunctions are caused by
contamination of the compressed air and
the agent to be processed.
To clean the implement, only use:
•
clear water,
•
clear water with a maximum water
temperature of 50°C,
•
a moist sponge or a moist cloth,
•
never a high pressure cleaning
device.
Clean
the
agent-hose
at
regular
intervals.
In case of leaks in the compressed air
system,
slightly
tighten
screw
connections on the spray gun and other
compressed air system components.
These bolted connections may work
loose:
•
because the system is constantly
moving due to the compressed air
and the agent to be sprayed,
•
because of improper handling, e.g. if
the spray gun is dropped.
Every operator may check compressed
air
supplies
and
repair
leaky
compressed air supplies.
Repair work on the electric supply may
only be executed by a skilled electrician.
Summary of Contents for Jelly power pack
