V1.0
11
If the buckle is off during measurement, please re-wrap the wrist cuff and fix it tightly and
measure it again.
Do not repeatedly measured within a short time, it may result in wrist gore, so that the
measurement value is not correct. In order to make the arterial blood pressure returned to its
previous state, relax your wrist for 2 or 3 minutes before the next measurement.
If Irregular Heartbeat(IHB) brought by common arrhythmias is detected in the procedure of
blood pressure measurement, a signal of “
”will be displayed.Under this condition, the
blood pressure monitor can keep function,but the results may not be accurate,it’s suggested
that you consult with your physician for accurate assessment.
Interrupt measurement:
If you need to interrupt the measurement for some reason(for example, you feel not good), at
any time. Press “on/off” button. The machine will automatically reduce the air pressure of the
wrist cuff, and interrupt the measurement. If the switch button can not be used, please remove the
wrist cuff and stop the measurement.
5.3 Answers for Questions
Anomalies
Cause
Correction
No display after
press the start button
Whether the power exhausted
Change a new battery
Whether the polarity position
anti-access
Install the battery in proper
placement
Measurement failure
occurs frequently or
measured blood pres
sure value goes extre
mely high or low.
Wristband does not hold with the
heart position relative level
Measuring with correct posture
Wristbands don’t roll up
Roll your wristbands correctly
Whether speak or move the arm
when Measure
Keep quiet, relax body, re-measure
Whether Clothes rolled
oppression arm
Take off clothes that Oppression arm,
re-measure
Pump work, but the
pressure does not
rise
Whether Wrist strap is poor
connections , there is leakage
Ask for repair
Whether Wristbands damaged due
to long years
Please buy a new one
Wrist Cuff leak in a
short time
Whether the cuff wrap too loose
Please wrap the cuff correctly
Even if you press the ON / OFF button , can not enter the
measurement
Please re-power, measured again
During
measurement
suddenly power off
When not use for a long time, the
temperature variation may make
the battery power exhausted
Change a new battery